Clear oils can darken the appearance of the wood. To retain the light character of oak please use Osmo Polyx®-Oil 3044 Raw. Be cautious when moving heavy objects such as electrical appliances and furniture. Always make sure you lift and never push or drag. If you cannot lift, slide a blanket or carpet under the objects to prevent scratching and gouging.

RP (Reduced Pressure) Technology: Spray pressure approx. 1,6 – 2,0 bar, Nozzle approx. 1,6 – 1,8mm. Apply approx. 2 teaspoons per m² to the surface and spread extremely thinly with Active Fibre Cloth from Osmo Opti-Set. For top coating Osmo white colours use white tinted Polyx Oils ( eg: 3040 or 3240) to avoid yellowing. Application of top coat of clear Osmo Polyx®-Oil Original can be carried out once the first coat has dried. However, if the first coat was a coloured Osmo finish ( eg Polyx®-Oil Tint or Wood Wax Finish Transparent) wait approx. 24hrs before applying Osmo Polyx®-Oil Original clear top coat. Wood pre-treated with Osmo Wood Protector 4006 may appear a little more dark and colour intensified. Always trial apply Osmo Top Oil 3068 Natural over the Wood Protector 4006 to ensure the final appearance meets with expectations.Damp clean with Osmo Spray-Mop which makes it really easy. The cleaning concentrate (Spray-Fix) effectively removes dirt without wear of treatment. The second coat after applying Spray-Wax 3010 Natural depends on the desired surface results (trial application):

For kitchen worktops, Osmo Wood Protector 4006 is an optional pre-treatment for absorbent wood like: Pine, Birch or Spruce. Osmo Wood Protector 4006 will help to raise the water repellant qualities of the timber prior to applying Osmo Top Oil.

Pallet overloaded

Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. For stain removal, apply directly to the soiled area – for especially tough stains, use a cloth or scotchpad and wipe away loosened dirt. For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended. We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items

Use mats at the outside of entrance doors to prevent unwanted dirt and grit being carried on your boots and shoes. In addition to this, it is no harm using interior door mats for the same purpose, you might even want to consider a built in matwell at your main entrance.Coat: with cup spray gun, RP Technology or Airless/Airmix Application amount is, among other things, dependant on the wood species and sanding grade etc, approx. Shake very well before use. Failure to mix all ingredients ( and colour) could lead to an increased patchiness. Use floor protectors on the legs of furniture to avoid scraping or scratching. If your furniture has floor casters make sure that they are of the wide variety. If they are of the narrow metal variety, there are special plastic and velvet cups that can be used underneath.