If the surface to be treated is merely dusty, then vacuum thoroughly until all traces of dust are removed and proceed directly to application. If there is ingrained dirt, wash with clean warm water and only resort to the use of soap detergents if gentle scrubbing with nylon bristle brush and warm water is ineff ective. Allow to dry out before proceeding to application. 2. Application As it happens there are other products available, although we are not promoting any of these and we have not unfortunately, been paid to mention any either! Applied Technologies has some of the best products that you can find in the whole marketplace. These are very high quality, and you can get them for a reasonable price.

Freezing and Thawing: Freezing and thawing can cause property damage to floors and walls, especially in locations prone to heavy winters. A sealer will prevent water from getting into your surfaces. Always apply the sealer evenly in thin layers, and don’t let it pool. You will need the coating to be completely even for it to dry to a clear, smooth finish. However, I can’t find any good advice (for the UK) of what to use to do about this. I don’t want the walls to be particularly glossy and shiny either. Rain and Wind: If it is raining while it is windy, the rain will come in at a horizontal angle, which makes it easier for the rain to penetrate crevices. A sealer will help combat this additional threat. Further Health and Safety information on this product is provided in the MSDS, copies of which are available from the Kingfi sher Technical Dept Tel. 01229 869100 or Fax 01229 869101. THE INFORMATION GIVEN IN THIS DATA SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS TO THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR COMPLETENESS. IT IS THE USER’S RESPONSIBILITY TO SATISFY THEMSELVES AS TO THE SUITABILITY AND APPLICATION OF SUCH INFORMATION FOR THEIR OWN USE.Our clear stone wall sealer, by contrast, is an advanced water-based fluoro-carbon which leaves no visible trace. It effectively repels liquids to protect the appearance of your stone surfaces without darkening. Liquids "bead up" on the surface and are not absorbed into the substrate, thus protecting your stone against staining. Suitable for interior sealing of: We follow a detailed, rigorous process to create content that is helpful, factually correct and meets the highest standard of integrity. Dependent on the porosity of the surface 1 litre of product should cover approximately 4 to 6 m2 . STORAGE / SHELF LIFE Disclaimer: “Unibond” is a registered trade mark, owned by Henkel, and is only used here as a product review. Thank you Any sealer you select should manage concrete dusting and prevent efflorescence, which is a powdery white substance that can appear on top or below surfaces. The more penetration power the sealer offers, the better it will be at preventing both of these issues.

Take some PVA, commonly known as Unibond®, and add about the equivalent of half a coffee mug to water and mix it in very thoroughly. The water should now look like milk.

Clear Stone Wall Sealer

Sealers are made from toxic materials. Wear special protective gear when applying the sealer, and stay away from it while it is drying. Cover any plants around the surface and remove any animals from the vicinity. Once dried, the sealer should not pose any more health risks. That is a question we get asked often and generally it is more expensive than internal but does so much more and is not marketed as decorative but PROTECTIVE because remember, your walls outside get a hammering from the weather. In addition, our company offers several solutions if your house suffers from damp and mould, and if it has a scruffy external appearance, then we would suggest our exterior wall coating system which is guaranteed for 20 years. Mildew and Mold: Mildew and mold are unsightly, smelly, and aggravating for allergies. Since a sealer will keep water out of the surface, mildew and mold are less likely to grow. Standard delivery is always free except to the Scottish Highlands & Islands, Northern Ireland & other UK offshore Islands.

Once the above is done, lightly brush the wall with a soft broom head or old emulsion brush to get rid of dust.We have adjusted the formula of this impregnating sealing product to improve application and sealing performance.