Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports. IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) It is equipped with mission-critical LTE Cat 1 capabilities and software based on OpenWRT, hence offering a high degree of customization. Maximum time (in seconds) the button can be held to perform an action, after which no action will be performed.

The Storage Memory Expansion function provides the possibility to expand the device's flash memory with a USB mass storage device. EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Draft EN 301 489-19 V2.2.0, Final draft EN 301 489-52 V1.2.0, EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019, EN IEC 61000-3-2:2019 The Add New User section is used to create additional users that can access the WebUI. After a new user is added, it will appear in the Users section.Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code The I/O Juggler is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such: Phone number of a single recipient or a Phone group of multiple recipients. The name and selection type of this field depends on the value set in the 'Recipients' field. Specifies whether the script should be uploaded from an external file or a path to an internal (on this device) script file should be specified. When set to 'on', the output maintains its new state after reboot (the state is changed in the config file as well).

Fixed 'I/O status' message to include correct Input/Output name based on info in ubus ioman objects This router also featuresEthernet, digital and analogue I/O, RS232, RS485, GNSS (GPS), microSD and USB interfaces that allow for a wide variety of industrial deployment scenarios.

Panorama Antennas MAR-7-21-2SP Multiband Whip

Note: Firmware version RUT9_R_00.07.01.1 released on 2021.11.22 was removed due to an issue with IPsec tunnel while using mobile connection. This is the Teltonika RUT955 Kit which includes GPS, LTE and WiFi Antennas Teltonika RUT955 - I/O Connectivity, performance and failover Please Note: This product has been discontinued. For the replacement model, please see the Teltonika RUT956. Teltonika RUT955 4G LTERS232/RS485 Router

Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services I/O’s: 10 Inputs/Outputs pin connector, 2 Inputs/Outputs pin on 4 pin power connector (available from HW revision 1600)QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e the entire procedure may take a very long time and includes a reboot at the end; exact time will vary depending on the size of the MSD (larger size will take longer; for example, using a 128 GB drive will take about 2 hours to fully set up, while a 16 GB will only take about 5 minutes). The Certificate Generation tab provides the possibility to generate TLS certificates required for secure authentication and communication encryption used by some of the devices services. Note: Firmware version RUT9_R_00.07.04.4 released on 2023.06.26 was removed due to an issue on certain modems with failing initial mobile connection after upgrading from RUT9_R_00.07.02.5 or lower. Lastly, you can configure Conditions based on date and time. Date/time Conditions can be configured based on:

A period of time (in seconds) which has to pass after a trigger event before the action is executed. x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high) Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fieldsFixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled Forces intervals to accept last day of month as a valid option if selected day does not exist during ongoing month. This field becomes visible only when 'Interval Type' is set to Month Days. This chapter of the user manual provides an overview of the Input/Output section for RUT955 devices. SSHFS is a tool, which allows you to mount a remote filesystem (in remote SSH server) to your RUT955 device using SSH. FW version RUT9_R_00.07.00 and above will not be supported on legacy-design (RUT955 *7V***) devices.