Designed to produce higher working pressures for applications that require high air flows, with low relative noise. Suitable for long duct runs up to 12m.

watts power consumption (low / mid / high speeds). 50 / 60 / 68 litres per second / 180 / 216 / 245 cubic metres per hour extraction rate (low / mid / high speeds)Controlled by remote ON/OFF light switch. The extraction rate of 245m³/hr leads the way in performance and power.

Operating at a maximum of just 24dB(A) and with a compact design, MF100S is ideal for applications where installation and extraction needs to be powerful yet discreet. The only negative I can see might be noise, in that the fan will be directly above the shower (Currently it is above the landing cupboard), BUT while the shower is on you won't hear it, and hopefully if it's way more efficient I won't need to have the timer at max for 25 minutes, perhaps 10 would do.Class II - double insulation - no earth required. Fully building code compliant. Fully BEAB approved This particular model; the MF100T, features an over-run timer that keeps the fan running for a period of up to 20 minutes (set upon installation), after power off, to ensure all moisture or stale air is extracted. I haven't investigated at all yet, but one thing he did fit is an isolator switch for the fan, so that will make working on it easier. MF100S is fully BEAB approved, building code compliant and is IPX4 rated Features of the Manrose MF100S Inline Fan Include: Rated to IPX4. Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction