Trims are used to finish off any untidy corners or edges that would have otherwise been exposed once you had finished fitting your cladding, perhaps your ceiling is uneven and you don’t have the necessary time or skill to scribe each individual panel to fit the bumps and dips in 08-the adjoining surface, that is where trims come in. They cover up a multitude of sins without the need to cover with silicone.

The most essential tool when it comes to fitting your trims, used to measure any edges so you can cut the trims accurately. Measuring Square Please note: it is recommended to leave a gap of 10mm between the Perforated Closure and the base of your in stallation, to ensure a necessary gap for airflow. The Perforated Closure needs to be perfectly level before fixing to the wall, as a Start Profile Trim will be fixed to the Perforated Closure. If your Perforated Closure is not fitted parallel, you may be at risk of unlevel cladding. Cladding trims are an excellent way to cover any untidy edges or gaps. Sometimes when you’re cladding your room your walls may be not be perfectly straight or a little uneven. This makes it difficult to cut the cladding to the correct shape of any opposing walls.cause staining of the profiles. Painting is not recommended on foam profiles unless done by an approved contractor. You should always take into account the possibility of making a mistake when cutting a trim to length. Especially when it comes to cutting any mitred joints. Uneven walls that bow or taper towards one end may prove difficult for even the most avid DIYer to cut to, which may result in gaps. With trims, these edges do not have to be perfect, as whichever trim is needed will cover most gaps in a decorative fashion. Why should I fit cladding trims? Once you have removed the supporting layer, the face profile of the trim can simply be adhered to the corner or edge, using either silicone or mitre adhesive. Beginning to fit your trims

The most efficient way to mitre a joint is by hand with a utility blade and a measuring square. Although this is not suitable for coving as you will not be able to cut an accurate curve to meet another coving trim. An Aluminium Perforated Closure Trim is an essential element for installing Cladco Fibre Cement Wall Cladding Boards . Designed with small holes, Performated Closure Trims encourage airflow and ventilation whilst preventing small animals/insects and debris from entering. In most situations, a trim will be needed to cover untidy cuts or gaps around external edges, internal corners, wall to ceiling cladding, or simply to complement the cladding edges. Cladding trims provide a clean look rather than using just silicone which can provide the inconsistent finish.Ventilation gaps within the Closure Trims, paired with the 50mm space between the battens and boards, work together to ensure your building has adequate airflow to prevent moisture from building up. For example if you’re fitting a trim over a 2m join, using a trim that measures 2.7m, you aren’t going to be able to utilise the 0.7m off cut effectively without having a joint with another cutting of trim. We supply everything you’ll need to cap off your cladding project, including starter trims, edge trims, butt joints and more. View our full cladding trims range below for products that will maintain their beauty and performance for many years to come. Have More Questions About Cladding Trims?