Before contemplating your inflatable kayak or canoe repair and buying adhesive or a repair kit, you will need to identify the fabric that it is made from. The type of fabric determines the type of adhesive, solvent and patch fabric that is required to undertake the repair. Many inflatable kayaks and canoes are made from PVC, but refer to the paperwork that came with yours or the manufacturer’s guidelines if you’re unsure. Supplied with detailed instructions on how to undertake a professional repair on all makes of PVC inflatable canoes and kayaks, such as Sevylor*, AquaMarina, Intex, Gumotex*, Itiwit and Hobie Kayaks. Pinhole leaks are another notoriously annoying repair to make. This is largely because locating the pinhole leak can be incredibly difficult due to its size.

Heat gun is another tool used for sealing inflatable kayaks after repairing injuries but also many other uses like fixing punctures or holes in inflatable boats, swim floats, pool toys etc. Some accessories will need when you are going to repair the inflatable kayak. Before gathering the tools you should know how you will patch the inflatable kayak. You will need different materials according to the inflatable kayak. Inflatable kayaks came with a repair patch kit. You will need some accessories for repairing are mentioned. Inflatable repairs can be divided into small tears or punctures and larger tears (over 50mm long). Small tears/punctures can be repaired with a single patch to the outside of the tube, larger tears should be repaired by affixing a patch both inside and on the outside.The kit contains a 5g tube of Stormsure Flexible Repair Adhesive, a 15cm TUFF Tape strip, two 75mm (diameter) TUFF Tape patches, along with protective gloves.

Interior patches along with outside patches can do a phenomenal job of securing air leaks. This method is best used for larger holes. When done well, this permanent patch can help restore the integrity of your inflatable kayak. How to Repair Leaking Air at the Seam For rubbers, the adhesive will be a two-part adhesive with glue and a curing agent. Simply follow the manufacturer’s instructions for mixing the two. How to Fix a Leak on an Inflatable KayakRepairs are not needed often, in fact sometimes never at all. Knowing how to handle one though will help you to be prepared for the worst. Too much air pressure can eventually cause splitting at the seams. Make sure you’re only filling your kayak to the exact recommendations on the manufacturer’s instructions. Don’t overfill it. Remove the masking tape and clean-off any excess adhesive with the MEK / hypalon solvent. It is important to remove any excess adhesive as if this remains on the surface of your tubes it will turn an unsightly brown!

If you need to get on the water sooner, let it dry 30 minutes then inflate the boat, inflating the area with the repair only ¾ full. Then make a permanent repair later. When you rinse or clean your kayak, ensure all the valves are closed, so you don’t get any water inside. A damp interior can breed mold and mildew. 3 – Use UV Protection Note: the warranty does not cover products used for rental, for hire or in professionally guided tours and other uses not considered normal recreational purposes; and punctures, cuts and abrasions sustained in normal use; and items involved in accidents; and items damaged in white water mishaps, and other unreasonable uses or improper storage. A professional home inflatable Intex Explorer K2 Repair Kit with grey and yellow PVC patch, perfect for all inflatable Kayaks hot tubs, spas, pools, inflatable toys, inflatable beds, and even Bouncy Castles. Sevylor Hudson Kayak Repair. Step #2: Rub the area with the help of abrasive paper, 120 grit paper is more sufficient for this, then cut reinforcement for repairing the patches for cutting carbon or aramid fabric is difficult. Then for repairing use the right resin for a better result. Polyester and vinyl ester are the best and highly recommended options for a stronger repair. Apply the mixture of resin or epoxy through the damaged area and put reinforcement that is how you can repair your kayak or canoe. Sevylor KayakEach patch kit contains - (1) 3" x 12" TEAR-AID Patch that cuts easily with scissors to any size, (1) 7/8 x 7/8" Patch, (1) 1 3/8 x 1 3/8" Patch, (1) 12" Reinforcement Filament for repairing tears at edges, (2) Alcohol Prep Pads, (1) Illustrated Instructions, Kit Dimensions: 3"x 5.5"x 1.25"