What Size Spanner do I need ?” is a common question. Theimmediate answer is another question: “ What type of thread does your nut and/or bolt have?” There are many types of threads available for nuts and bolts, Metric, Unified (UNF/UNC and British Standard (BSW/BSF) are just three that we deal with, and they all have different measurements depending on the international standard they are manufactured to. For example, a metric M6 nut and bolt are very close to an imperial 1/4″ UNC/UNF thread. Measuring the thread manually you could be mistaken for thinking they are the same. Also, a 1/4″ BSW/BSF nut may sound similar but is different again in size. A standard metric M6 nut will be 10 mm across the flats, a 1/4″ UNC is just under 11mm and a 1/4″ BSW just over 11mm. Attempting to use the incorrect (oversize) spanner could cause the spanner to slip, rounding off the edges of the hexagon.

Metric Spanner Wrenches | McMaster-Carr Metric Spanner Wrenches | McMaster-Carr

As you can see, it is best to know the thread type of the nut and then choose the spanner size that will then give the best fit. Once you know the thread type and size of the nut, then it is simple to look up the correct spanner size. In engineering circles a Spanner is often called a wrench and is generally used to grip a nut or bolt while applying torque or put more simply to help you fasten and loosen nuts and bolts. Just to mix things up a little; for nuts and bolts with BSW or BSF threads, you will need a spanner marked with the diameter size of the thread e.g. a 1/4″BSW or BSF nut or bolt would require a spanner marked 1/4″BSW. METRIC You should also be aware that the size given to any nut or bolt is relevant to the thread type and size. A metric M6 nut for example means the measurement ‘d’ shown above is approx. 6mm and this ‘M6 – 6 mm’ measurement bears no resemblance to the distance across the flats, or the spanner size required.